熱門搜索：耐壓儀，交流耐壓儀，高壓耐壓測試儀，耐電壓絕緣測試儀，絕緣耐壓試驗儀
您好，歡迎訪問上海徐吉電氣有限公司！ 咨詢熱線：13818304481
Product category
您的位置：網站首頁 > 技術文章 > 中國臺灣華儀7110、7112程控耐壓測試儀 中國臺灣華儀7110、7112程控耐壓測試儀
簡單介紹
交流耐壓測試儀，5KV，12mA，鍵盤鎖定功能，測試時間999.9秒。
產品特點
技術參數
SPECIFICATIONS | ||||
MODEL | 7110 | 7112 | 7120 | 7122 |
AC WITHSTAND VOLTAGE | ||||
Output Rating | 5KVAC/12mA | |||
| Range | Resolution | Accuracy | |
Output Voltage, KVAC | 0-5.00 | 0.01 | ±（2% of setting + 5V） | |
Output Frequency | 50Hz/60Hz ±100ppm, User Selection | |||
Output Waveform | Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5 | |||
Output Regulation | ± (1% of output + 5V), From no load to full load | |||
SETTINGS | ||||
Hi-Limit AC Current, mA | 0.10 - 12.00 | 0.01 | ±（2% of setting + 2counts） | |
Lo-Limit AC Current, mA | 0.00 - 12.00 | 0.01 | ±（2% of setting + 2counts） | |
Ramp Time, second | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
Dwell Time, second | 0, 0.2 - 999.9 | 0.1 | ||
Arc Detection | 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) | |||
DC WITHSTAND VOLTAGE (7120,7122 ONLY) | ||||
Output Rating | 6KVDC/5mA | |||
Output Voltage, KVDC | 0 - 6.00 | 0.01 | ±（2% of setting + 5V） | |
Output Ripple | <5%（6KV/5mA at Resistive Load） | |||
SETTINGS | ||||
Hi-LimitDC Current, mA | 0.02 - 5.00 | 0.01 | ±（2% of setting + 2counts） | |
Lo-LimitDC Current, mA | 0.00 - 5.00 | 0.01 | ±（2% of setting + 2counts） | |
Ramp Time, second | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
Dwell Time, second | 0, 0.2 - 999.9 | 0.1 | ||
Arc Detection | 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) | |||
Discharge Time | < 200 msec | |||
INSULATION RESISTANCE (7112,7122 ONLY) | ||||
Output Rating | 1KVDC/1000MΩ | |||
Output Voltage, KVDC | 0.10 - 1.00 | 0.01 | ±（2% of setting + 3V） | |
SETTINGS | ||||
Hi-Limit Resistance, MΩ | 0, 1 - 1000 (0=OFF) | 1 | ±（3% of setting+2counts）at > 500VDC | |
Lo-Limit Resistance, MΩ | 1 - 1000 | 1 | ±（7% of setting +2counts）at <500VDC | |
Delay Time, second | 0, 0.5 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
MEASUREMENT | ||||
AC/DC Voltage, KV | 0 - 6.00 | 0.01 | ±（1.5% of reading + 1count） | |
DC Voltage, KV (IR only) | 0.10 - 1.00 | 0.01 | ±（1.5% of reading + 3V） | |
AC Current, mA | 0.10 - 12.00 | 0.01 | ±（2% of reading + 2counts） | |
DC Current, mA | 0.02 - 5.00 | 0.01 | ±（2% of reading + 2counts） | |
Resistance, MΩ | 1 - 1000 | 0.001 | ±（3% of reading+2counts）at > 500VDC | |
GENERAL | ||||
Input Voltage AC | 115/230Vac±15%, 50/60Hz ± 5%, Fuse 3.1 Fast | |||
PLC Remote Control | Input : Test , Reset | |||
Output : Pass , Fail , Processing | ||||
Memory | 5 Sets Store/Recall of each Memory, 4 Test Mode Selectable （W, I, W～I(xiàn), I～W Only 7112, 7122） | |||
Display | 16×2 LCD with back light | |||
Key Lock | To prevent unauthorized alteration of the test Parameters | |||
Calibration | Build-in software and external calibrated meters | |||
Environment | 0-40℃, 20-80%RH | |||
Dimension/Net Weight | 280mm(W)×89mm(H)×370mm(D)/ 9Kg | |||
STANDARD ACCESSORIES | ||||
Power Cord(10A) | ×1 | |||
Fuses | ×3 (Including a spare contained in the fuse holder) | |||
Hipot Test Lead ,1.5m(1101) | ×1 | |||
Hipot Return Lead ,1.8m(1102) | ×1 | |||
*product specifications are subject to change without notice. | ||||
電話021-56412027
傳真021-56146322 
郵箱[email protected]
公司地址上海市寶山區水產西路680弄4號樓508
QQ交談
咨詢電話